0
0
Your basket is empty...
Xgard Type 6 for Hydrogene (H2) 50% vol in Air, SS body, M20, ATEX
Reference: XG6-S1-01-TT
Xgard Type 6 is flameproof thermal conductivity type gas detector. Thermal conductivity senzors are used to monitor volume concentrations of gasses.
Your price
on inquiry
Availability: ask us
Product description
Product description
Xgard Type 6
is flameproof thermal conductivity type gas detector. Thermal conductivity senzors are used to monitor volume concentrations of gasses.
Main features
- low cost of ownership
- easy installation and maintenance, simple replacement of senzors
- flexible installation options
- rugged and reliable
- made from stainless steel, spray deflectors and weatherproof caps are available for use in areas subject to regular wash-downs, or offshore environments
- ATEX certificate
Parameters
Parameters
| Brand: | XGARD |
| Category: | Measurement and control / Gas measurement / Fixed detectors |
Technical specifications
| Dimensions | 156 mm x 166 mm x 111 mm |
| Weight | 3.1 kg |
| Ingress protection | IP65, IP66 with weatherproof cap |
| Cable entries | 1 x M20 |
| Terminations | 0.5 – 2.5 mm2 csa (20–13 awg) |
| Sensor type | thermal conductivity |
| Operating temperature | +10 až +55 °C |
| Humidity | 0–90% RH |
| Zero drift | < 2% FSD/month |
| Response time | T90 < 15 s |
| Operating voltage | 10 – 30 V |
| Power reguirements | 50 mA/24 V |
| Electrical output | 3-wire 4–20 mA |
| Approvals ATEX | Ex II G, EExd IIC T6 |
Available gases and ranges*
| Argon | contact us |
| Carbon Dioxide | contact us |
| Helium | contact us |
| Hydrogen | 0–5%, 10%, 50% vv in air; 0–20%, 25%, 30%, 50% vv in N2 |
*One detector is for one gas and one range, therefore it's needed to refer to the relevant part number in case of your interest **Other sensors and ranges maybe available, please contact Chromservis s.r.o.
Use
| Gas detected | H2 |
Operating conditions
| ATEX | ATEX |
| Analogue output | 4-20 mA |
| Detection/Operation principle | TCD |
