Your basket is empty...
Xgard Type 5 is flameproof flammable gas detector with 4 – 20 mA output. Poison resistant pelistors are used to detect flammable gases.
is flameproof flammable gas detector with 4 – 20 mA output. Poison resistant pelistors are used to detect flammable gases.
Czech datasheet in pdf for XGARD detector can be found at this link https://www.chromservis.eu/…as-detection.
Brand: | XGARD |
Category: | Measurement and control / Gas measurement / Fixed detectors |
Dimensions | 156 mm x 166 mm x 111 mm |
Weight | 1 kg |
Ingress protection | IP65, IP66 with weatherproof cap |
Cable entries | 1 x M20 |
Terminations | 0.5 – 2.5 mm2 csa (20–13 awg) |
Sensor type | pellistor |
Operating temperature | –40 až 55 °C |
Humidity | 0–99% RH |
Zero drift | < 2% FSD/month |
Response time | T90 < 15 s |
Operating voltage | 10 – 30 V |
Power requirements | 50 mA/24 V |
Electrical output | 3-wire 4–20 mA |
Approvals ATEX | Ex II G, EExd IIC T6 |
Acetylene | 0–100% LEL |
Ammonia | 0–25% LEL |
Butane | 0–100% LEL |
Ethane | 0–100% LEL |
Ethylene | 0–100% LEL |
Hydrogen | 0–100% LEL |
LPG | 0–100% LEL |
Methane | 0–100% LEL |
Pentane | 0–100% LEL |
Petrol | 0–100% LEL |
Propane | 0–100% LEL |
Vinyl Chloride | 0–100% LEL |
*One detector is for one gas and one range, therefore it's needed to refer to the relevant part number in case of your interest **Other sensors and ranges maybe available, please contact Chromservis s.r.o.
Gas detected | H2 |
ATEX | ATEX |
Analogue output | 4-20 mA |
Detection/Operation principle | Pellistor |