0
0
Your basket is empty...
Xgard Type 2 for hydrogen (H2), 2000 ppm, SS body, M20, ATEX
Reference: XG2-S1-01-AQ
Xgard Type 2 is flameproof toxic and oxygen gas detector. Electrochemical sensors are used to detect a vast range of toxic gases and oxygen.
Your price
on inquiry
Availability: ask us
Product description
Product description
Xgard Type 2
is flameproof toxic and oxygen gas detector. Electrochemical sensors are used to detect a vast range of toxic gases and oxygen.
Main features
- low cost of ownership
- easy installation and maintenance, simple replacement of sensors
- flexible installation options
- rugged and reliable
- made from stainless steel (SS 316), spray deflectors and weatherproof caps are available for use in areas subject to regular wash-downs, or offshore environments
- ATEX certificate
Czech datasheet in pdf for XGARD detector can be found at this link https://www.chromservis.eu/…as-detection.
Parameters
Parameters
| Brand: | XGARD |
| Category: | Measurement and control / Gas measurement / Fixed detectors |
Technical specifications
| Dimensions | 156 mm x 166 mm x 111 mm |
| Weight | 3,1 kg |
| Ingress protection | IP 65, IP66 with weatherproof cap |
| Cable entries | 1 x M20 |
| Terminations | 0.5 – 2.5 mm2 csa (20–13 awg) |
| Sensor type | electrochemical |
| Operating temperature | –20 až 50 °C |
| Humidity | 0–90% RH |
| Zero drift | < 2% FSD/month |
| Response time | T90 < 10 s for oxygen, T90 < 30 s for toxic gases |
| Operating voltage | 8–30 V |
| Power requirements | max 24 mA |
| Electrical output | 2-wire 4–20 mA |
| Approvals ATEX | Ex II G, EExd IIC T6 |
Available gases and ranges*
| Carbon Monoxide | 50, 100, 250, 300, 500, 1000 ppm |
| Hydrogen | 200, 2000 ppm; 2%, 4% vv |
| Hydrogen Sulphide | 5, 10, 20, 25, 50, 100, 200 ppm |
| Oxygen | 25 % vol. |
*One detector is for one gas and one range, therefore it's needed to refer to the relevant part number in case of your interest **Other sensors and ranges maybe available, please contact Chromservis s.r.o.
Use
| Gas detected | H2 |
Operating conditions
| ATEX | ATEX |
| Analogue output | 4-20 mA |
| Detection/Operation principle | Electrochemical |
