0
0
Your basket is empty...
Xgard Type 1 for nitrogen dioxide (NO2), 10 ppm, SS body, M20, ATEX
Reference: XG1-S1-01-SK
Xgard is intrinsically safe toxic and oxygen gas detector. Electrochemical sensors are used to detect a vast range of toxic gases and oxygen.
Your price
on inquiry
Availability: ask us
Product description
Product description
Xgard is intrinsically safe toxic and oxygen gas detector. Electrochemical sensors are used to detect a vast range of toxic gases and oxygen.
Main features
- low cost of ownership
- easy installation and maintenance, simple replacement of sensors
- flexible installation options
- rugged and reliable
- made from stainless steel 316, spray deflectors and weatherproof caps are available for use in areas subject to regular wash-downs, or offshore environments
- ATEX certificate
Czech datasheet in pdf for XGARD detector can be found at this link https://www.chromservis.eu/…as-detection.
Parameters
Parameters
| Brand: | XGARD |
| Category: | Measurement and control / Gas measurement / Fixed detectors |
Technical specifications
| Dimensions | 156 mm x 166 mm x 111 mm |
| Weight | 3.1 kg |
| Ingress protection | IP65, IP66 with weatherproof cap |
| Cable entries | 1 x M20 |
| Terminations | 0.5 – 2.5 mm2 csa (20–13 awg) |
| Sensor type | electrochemical |
| Operating temperature | –20 až 50 °C |
| Humidity | 0–90% RH |
| Zero drift | < 2% FSD/month |
| Response time | T90 < 10 s for oxygen, T90 < 30 s for toxic gases |
| Operating voltage | 8–30 V |
| Power requirements | max 24 mA |
| Electrical output | 2-wire 4–20 mA |
| Approvals ATEX | Ex I G, EExia IIC T4 |
Available gases and ranges*
| Ammonia | 50, 100, 250, 500, 1000 ppm |
| Arsine | 1 ppm |
| Bromine | 3 ppm |
| Carbon Monoxide | 50, 100, 200, 250, 500, 1000 ppm |
| Chlorine | 3, 5, 10, 20, 50, 100 ppm |
| Chlorine Dioxide | 1 ppm |
| Diborane | 1 ppm |
| Ethylene Oxide | 10, 50, 100 ppm |
| Fluorine | 1 ppm |
| Germane | 2 ppm |
| Hydrogen | 200, 2000 ppm |
| Hydrogen Chloride | 10, 25 ppm |
| Hydrogen Cyanide | 25, 30 ppm |
| Hydrogen Fluoride | 10 ppm |
| Hydrogen Sulphide | 5, 10, 20, 25, 50, 100, 200, 250, 300, 1000 ppm |
| Nitric oxide | 25, 50, 100 ppm |
| Nitrogen Dioxide | 10, 50, 100 ppm |
| Oxygen | 25 % vol. |
| Ozone | 1 ppm |
| Phosgene | 1 ppm |
| Phospine | 1 ppm |
| Silane | 1 ppm |
| Sulphur Dioxide | 10, 20, 50, 100, 250 ppm |
| Volatile organics | 100 ppm |
*One detector is for one gas and one range, therefore it's needed to refer to the relevant part number in case of your interest **Other sensors and ranges maybe available, please contact Chromservis s.r.o.
Use
| Gas detected | NO2 |
Operating conditions
| ATEX | ATEX |
| Analogue output | 4-20 mA |
| Detection/Operation principle | Electrochemical |
| Relays | Ne |
