0
0
Your basket is empty...
Sorbent tubes ANASORB CSC,ANASORB CSC, 2 tubes, 8x110mm, 50 sets
Reference: 226-37
Sorbent tube sampling is the NIOSH/OSHA/EPA approved method for collecting most hazardous gases and vapors from the air. A sample is collected by opening a tube, connecting it to a sample pump, and pulling air through the tube with the pump. Airborne chemicals are trapped onto the surface of the sorbent.
Your price
on inquiry
Availability: ask us
Product description
Product description
Sorbent tube sampling is the NIOSH/OSHA/EPA approved method for collecting most hazardous gases and vapors from the air. A sample is collected by opening a tube, connecting it to a sample pump, and pulling air through the tube with the pump. Airborne chemicals are trapped onto the surface of the sorbent. The tube is extracted using solvents or heat. The sample extracted from the tube is analyzed to determine the amount of chemical hazard present. Tubes produced by SKC company excel good-quality with reproducible recoveries and low standard deviation. SKC offers a complete line of tubes for occupational and environmental methods. To select a tube for a specific compound search the Sampling Guide here
Anasorb CSC is coconut-shell charcoal based sorbent. The adsorbent is suitable for sampling a broad range of primarily non-polar compounds.
Main features
| Mesh Size | 20/40 |
| Adsorbent properties | SKC proprietary sorbent, high surface area |
| Recommended temperature limit | 900°C |
Tube specifications
- set of two tubes
| Sorbent (coating) | Anasorb CSC + Anasorb CSC |
| Size (mm) ODxL | 8×110 + 8×110 |
| Sections | 1 + 1 |
| Sorbent (mg) | 400 + 200 |
| Ends | Glass Sealed |
| Separators | Foam, Glass Wool + Foam, Glass Wool |
Parameters
Parameters
| Brand: | |
| Category: | Laboratory instruments and accessories / Air Sampling / Sorbent tubes |
Dimensions
| Sorbent tube OD | 8 |
Use
| Extraction method | Solvent extraction |
Material
| Sorbent (coating) | Combined |
