The 308 Series regulators are specifically designed to prevent freeze-up problems associated with high flows of carbon dioxide and nitrous oxide. As Carbon Dioxide or Nitrous Oxide passes through a regulator seat, dry ice can form if the flow is too high, causing the regulator to freeze up.
The 308 Series regulators are specifically designed to prevent freeze-up problems associated with high flows of carbon dioxide and nitrous oxide. As Carbon Dioxide or Nitrous Oxide passes through a regulator seat, dry ice can form if the flow is too high, causing the regulator to freeze up.
Each letter/number in the catalog number indicates the selected valve configuration.
A – Outlet pressure/outlet gauges range B – – Inlet pressure/gauges range C – Outlet fittings, needle or diaphragm valves.. D – Gauge – different units CON – Inlet connections OP – Optional Accessories
Please consult with us the correct valve selection.
Regulators brochures can be found at this link https://www.chromservis.eu/…as-detection
Brand: | 308 Series regulator |
Category: | Measurement and control / Gas measurement / Pressure regulators |
Connector type | Description | Generic gas property | Example gases or mixtures components |
---|---|---|---|
1 | W 21.8 × 1/14" LH | Flammable | Hydrogen, Propane |
2 | W 21.8" x 1/14" LH | Flammable | Propane |
3 | Yoke | Flammable | Acetylene |
3.1 | M 24 × 2" LH | Flammable | Acetylene |
5 | W 1" x 1/8" LH | Toxic | Carbon Monoxide |
6 | W 21.8 × 1/14" | Various | Argon, Helium, Carbon Dioxide |
7 | G 5/8" | Toxic | Sulphur Dioxide |
8 | W 1" x 1/8" | Toxic | Boron Trichloride |
9 | G 3/4" | Oxidiser | Oxygen |
10 | W 24.32 × 1/14" R | Inerts | Nitrogen |
11 | G 3/8" | Oxidiser | Nitrous Oxide (>3 l size) |
12 | G 3/4" INT | Oxidiser | Nitrous Oxide (<3 l size) |
13 | G 5/8" INT | Non Flammable | Air |
14 | M 19 × 1.5 LH | Various | Mixtures |