Hydrogen Generators NM-H2 Plus The new NM-H2 Plus series hydrogen generators use the latest polymer electrolyte membrane (PEM) technology to produce high purity hydrogen. Hydrogen is produced using distilled or deionized water from hydrolysis, through a polymer membrane.
The new NM-H2 Plus series hydrogen generators use the latest polymer electrolyte membrane (PEM) technology to produce high purity hydrogen. Hydrogen is produced using distilled or deionized water from hydrolysis, through a polymer membrane. Electrolytic dissociation separates the water into its twomain components: hydrogen ready for analytical use, and oxygen that is released into the air. No acid no alkaline solutions are used in the hydrogen generation cycle. The pressure adsorptive drying column with automatic regeneration dries hydrogen and eliminates all down time for dryer maintenance that is typical of other systems on the market, assuring the best hydrogen purity at all times. The only NM-H2 Plus maintenance is a refill of the water tank (the optional auto refill is available), plus replacement of deionezer bag in a period of approximately 6 months. The exclusive cascading option allows up to 32 units to be connected in series, producing flow-rates of up to 32 litres.
The NM-H2 series generators are ideal for:
The very limited internal volume (less than 50 ml) allows safe use of the gas generators where the use of cylinders is risky or prohibited. The application of tested safety technologies stops the unit in the event of leaks or malfunctions. Hydrogen gas generators avoid the need for expensive installation of gas pipelines from the cylinder storerooms to the labs,as well as the need to repeatedly change the bottles.
Hydrogen as a carrier gas is faster and more sensitive than the more expensive helium. Run time savings of 25% to 35% without a decline in resolution. Moreover, the use of hydrogen as a carrier gas allows lower temperature elution, thus extending the life of the chromatograph column.
H2 max. flow | 250 Nml/min |
H2 purity | 99.99996% |
H2 pressure | 1–160 psig / 0.1–11 barg |
H2 pressure accuracy | 0.1 bar ± 0.5% |
H2 drying | Adsorptive column with PSA technology |
Membrane | Polymer electrolyte membrane (PEM) |
Water quality | Deionized or demineralized (<2uS) |
Internal H2 volume | < 50 ml at max pressure |
H2 output connection | to stainless‐steel or copper Swagelok fitting and 1/8” tubing |
Cascading of H2 outputs | Yes (up to 32 units) |
Operating temperature | 15 to 40°C |
Operating humidity | 0‐80%, non condensing |
Protection | IP2× |
Power | 110–120V 60Hz / 220–240V 50Hz |
Consumption | 225W |
Dimensions (WxHxD) | 230×450×370mm |
Weight | 17kg |
Brand: | NM-H2 Plus |
Category: | Laboratory instruments and accessories / Chromatography / Gas Generators |
Max. flowrate | 0.25l/min |
Gas generated | H2 |